Battery-powered line striper now has became a popular choice in road marking projects. Here we are going to introduce three main advantages of battery-powered line striper and what projects are suitable to use it. If you are hesitating to choose a line striper, this blog help you to have a better understanding of battery-powered line striper.
What is a line striper
A liner striper is also called a road marking machine. It is a kind of equipment that used to mark straight and uniform lines. Change the traditional brush or roll mode to a higher efficiency painting way. A professional line striper is usually a airless or hydraulic paint sprayer that has a high pressure that can drive the paint through the hose and spray gun and push it out of the tiny orifice. The paint in this process becomes fine mist.
Three Advantages of battery-powered Line Stripers
1. Environment-Friendly
(1)No Fumes
Unlike gas-powered line striper, battery-powered line striper is totally powered by electricity, which produces no smoke, ash, or direct on-site emissions when operated. Based on this characteristic, battery-powered line striper is suitable for line marking projects in enclosed area, such as warehouse and stadiums.
(2)Low Noise
When you need to work in noise-restricted area or work in the night, the battery-powered line striper is the ideal choice for you. Without the noise created by the operation of gas engine, the voice of a battery-powered line striper is way lower than a gas-powered one.
2.Low Maintenance and Operational Costs
(1)Easy Maintenance
Compared with gas-powered road marking machines, a battery-powered one eliminates gas engine maintenance. It doesn’t require oil changes, spark plug replacements, or air filter cleaning. TIE EAR1500B battery-powered line striper uses a brushless motor, which has a longer lifespan compared with a brushed motor because there are no physical brushes to wear down.
(2)Low Operation Costs
Use battery powered line striper save your cost on adding fuels. Also, its start-up process is much easier than a gas-powered line striper. No choke, primer, or pull cord; just flip the switch and set the pressure, then start marking.
3.Versatility and Maneuverability
(1)Versatility
A battery-powered paint sprayer can cover almost all small and medium road marking projects. Whether indoor or outdoor, a battery-powered paint sprayer can easily handle. Expand your service offering and revenue potential.
(2)Maneuverability
TIE EAR1500B uses a lithium battery rather than a lead-acid battery, which is 50%-70% heavier than the former. For easy turning and movement, the EAR1500B road marking machine is equipped with a front swivel wheel that handles tight curves with ease.
Applications of battery-powered Line Stripers
1.Indoor Facility
Indoor projects are totally the home court of battery-powered line strippers. It solves the safety hazard and noise problem caused by gas engine exhaust. An ideal choice for marking projects that require zero emissions.
Aisle lanes and forklift pathways: Create clear, durable guidance systems to improve traffic flow and safety in busy warehouses and distribution centers.
Storage zones and racking boundaries: Clearly define material storage areas to maximize space utilization and maintain organization.
Safety boundaries and restricted areas: Mark hazardous zones, fire lanes, and no-entry areas with precision, improving workplace safety compliance.
2.Stadium&Arenas
These places usually have strict requirements regarding noise and fumes. A battery-powered line striper is right here to solve these marking projects:
Sports field marking: Lay down crisp, professional lines for multiple sports on a single surface, often with different paint formulations.
Gymnasium floor lines: Replace expensive manual taping methods for basketball courts and other indoor sports, providing a cleaner, more efficient process.
Parking structure and service area marking: Maintain these high-traffic areas at night or during off-hours without disturbing tenants or neighboring businesses.
3.Parking Lots
Parking stall striping: A single machine can complete over 200 parking stalls on a single charge of two batteries, making it practical for medium-to-large re-stripe projects.
Curb and edge marking: Features like a front swivel wheel allow operators to stripe right up to the curb and navigate tight curves with ease, ensuring professional-looking results in every corner of a lot.
Directional arrows and crosswalks: Support for larger tip sizes (up to .027″ for traffic paints) ensures bold, clear markings that meet municipal standards.
4.Public Works
Airport runways and tarmacs: Marking long, precise lines on massive paved surfaces. TIE EAR150B road marking machine is equipped with a 24A battery that can support 8 hours of work when fully charged.
Highways and public roads: In areas with strict noise ordinances or during nighttime construction, battery power allows work to continue without disturbing nearby residents.
Busy commercial districts: Striping in urban areas often faces noise complaints; battery power eliminates this concern, allowing for daytime work in some cases.
Battery-powered Line Striper Selection Guide
1.Battery Power and Runtime
There are two key specifications should pay attention to: voltage and amp-hours. Voltage is related to the power performance and the amp-hours is related to the runtime. Higher voltage generally delivers stronger performance, and higher amp-hours meas longer spraying time on a single charge. TIE EAR1500B is equipped with a 60V and 24A battery that can support 8-hour working on a single charge. If it is still not enough for you, we have upgrade option for you – 72V and 32A battery.
2.Motor Type
When comes with motor type, brushless motor is the best option to choose. Compared with a brushed motor, a brushless motor has a higher efficiency, a stronger power, a longer lifespan and a lower maintenance cost.
3.Paint Compatibility
Check the applicable paint scope of the line striper you pick to ensure it can spray the material you will use.
4.Pump Durability
The pump is the most important part for a battery-powered line striper. To a certain extent, it decides the performance and the lifespan of the machine. TIE pump is made of carbon steel and 9Cr18MoV that ensures the high durability.
FAQ
1.What are the different types of line marking machines?
Classified from the way to operate the machine, line marking machine have three types: hand-guided, self-propelled and vehicle-mounted systems for highways and airports.
2.How to prepare a surface before applying new parking lot lines?
To prepare a parking lot, thoroughly clean the surface by pressure washing to remove dirt, oil, and debris, and let it dry completely. Immediately before painting, use a blower to clear any remaining loose particles.
3.What kind of paint is best for durable road markings?
For durable road markings, use high-quality, fast-drying traffic paints. Reflective paints with glass beads offer superior nighttime visibility, while high-solids solvent-based acrylics and polyurea coatings provide excellent abrasion resistance and long life.
Final Thought
In general, battery-powered line striper has great advantages in small and medium road marking Projects. They create no fumes and noise and offer excellent service time for continuous working in several hours. If you are looking an excellent battery-powered line striper, TIE EAR1500B road marking machine is here for you! If you are interested, contact our salesman today to get more information.